Description Features Specifications • Controls up to eight high in-rush loads• Channel buttons allow for toggling a load on/off• Channel status LEDs indicate whether a load is on or off• Module Override button allows toggling between the module override scene and all channels off orsetting the module override scene to to the current channel’s on/off settings• Module Status LED indicates if module power is on with normal operation, off, or in thermal overload• Link/Activity LED indicates system link status, communication activity, or firmware update status• Reset button can be used for restoring factory defaults or network configuration settings• Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lightsbefore the control system is installed or in case the controller malfunctions• Module can be installed in either a Contro4 5- or into a 2-slot panel or into a third-party DIN rail panel Model numberC4-DIN-8RELSW-E Power requirements100-277V AC, 50/60 Hz 240V AC, 50 Hz Line feeds (circuits)4 Power consumption3.5W Supported load types Incandescent, halogen, electronic low-voltage transformers (ELV), magnetic lowvoltage transformers (MLV), fluorescents, compact fluorescents, LEDs, motors Control communcationsEthernet Line-voltage push terminals19 (Line 1, Line 2, Line 3, Line 4, Neutral 1, Neutral 2, Neutral 3, Neutral 4, Earth Ground, Loads 1-8, Aux In, Aux Out) Recommended wire gaugeOne 26 AWG to 12 AWG (0.12 mm2 to 2.5 mm2) per terminal RJ-45 ports(2) 1 Ethernet in, 1 Ethernet passthrough Operational temperature0 to 40 ˚C (32 to 104 ˚F) Humidity5% to 95% non-condensing Storage-20 to 70 ˚C (-4 to 158 ˚F) Heat dissipation10 BTU/hr @120VAC Dimensions H × W × D219 × 115 × 57 mm (8.6 × 4.5 × 2.2 in.) DIN module width12M Weight1.3 kg (2.9 lb.) Shipping weight1.4 kg (3.3 lb.)
